Title:
Transformers G1 Brawn Minibot Pre Rub
Description:
Brawn (Mini-Vehicle, 1984/1985/1986)
Takara ID number: 15
The Transformers Brawn was part of the original assortment of Autobot Mini Vehicles released in 1984. The mold was first released in 1983 as part of Takara’s Micro Change line, but evidence exists to suggest it was originally designed by defunct American toy company Knickerbocker for the cancelled toyline, Mysterians. He transforms into a (somewhat inaccurate) Suzuki Jimny SJ20, with a non-removable spare tire on the roof.There are a couple different variations of the toy. The initial versions have the faceplate and upper corners of the helmet as a part of the back vehicle piece, poking through holes in the robot part, while later runs have the faceplate as part of the robot-part facade. Both versions can be found in the 1984 pre-rubsign releases of the toy, while only the ”full face front” version is available in the 1985 be-rubsigned release. There are also multiple copyright notice configurations on the back end of the vehicle mode if you care about that kind of thing.The Japanese release of ”Gong” was in a small box instead of on a card. Only the rubsign variant was available in this market (presumably the face tooling matches the Hasbro 1985 release, but that is not confirmed).There are a large number of redecoes of Brawn in various markets south of the border, which are covered in individual entries below (to reduce the clutter in this one). Mostly unchanged versions of Brawn were sold in Mexico by IGA and in Venezuela by Rubiplas: it’s very likely that there are small differences in plastic hues and copyright stampings, and, of course, quality control.The Brawn mold was also used to create the Malignus Jipe, and retooled to make Outback (except in Mexico, where Outback was a straight redeco of Brawn).
Brawn was an Autobot Mini Vehicle released in 1984, in the first wave of Generation 1. Brawn transforms into a generic off-road vehicle resembling a Land Rover Ninety (known later as the Land Rover Defender), with a Jeep-inspired chrome grill, and sporting a spare wheel on the roof.
Origins
His mold was originally THOUGHT to part of Takara’s 1983 Microman: Microchangeline as MC04 Mini CAR Robo 05: Jeep. However, recent discoveries published by YouTube’s Chris McFeely, indicate that Brawn was likely designed for Knickerbocker Toys’s Mysterians: Mobile Force as a toy called Jeepar, before Knickerbocker went out of business and presumably sold the designs to Hasbro or Takara, while selling some other non-vehicle Mysterians designs to Marchon. Brawn was eventually patented by Hideaki Yoke. The US Patent, titled Reconfigurable toy vehicle, was filed on October 4, 1985 (U.S. Patent No. USD297035 S).
Description
Brawn is molded primarily in two colors, (using black only for the wheels), and uses no die-cast metal. He shares his deeply treaded plastic wheels with wave-mates Huffer and Gears. Like all the former Microchange Mini CAR “big vehicles,” he also shares a similar, very simple, transformation scheme. His chrome arms pull out from the sides, where they are hidden behind rotating door panels, and his legs swing down from the rear of the vehicle. The black hood still bears a molded, stylized "M”, once thought a reference to the Microchange logo, but more likely the Mysterians logo, as it matches the M logo on Marchon’s eventual release of the geometrically-shaped Mysterians. Also like his brethren, his face is molded and painted flush with the bottom of the vehicle. Brawn’s low price point meant he included no accessories and only a sparse couple of stickers. Paint detail is limited to his face.
Date stamp location: back of vehicle
Rubsign location: None (1984), or left side door (1985)
Collector Notes
Brawn’s chrome arms are frequently broken and missing. they are a weak point in the design, and can be easily snapped off from the shoulder pins if they are pulled in the wrong direction. Furthermore, his arms may appear to be whole to the casual observer even when the chrome ares are missing due to the arm-like shape of his doors in robot mode.
Variants
There are two primary distinguishing factors among US-release Brawns. Initial releases are identified by two recessed corners on his helmet, which are part of a separate plate behind the main body plate that also includes the face, while this was later simplified to all be part of the main body piece. Later still, a square indent was added to the roof for a rubsign, which was never used for that purpose, probably because the spare tire and running lights would have made the sticker difficult to activate with a fingertip. At some point after the helmet simplification in mid 1984, a second mold was initiated, likely to replace the aging Microchange mold. With Type 3b, mushy details become sharp and the bottom half of the stamp no longer sits atop the block that erased the original “Takara Japan” stamp. Type 3b was modified into Types 4 and 5, and 3a was retired.
Type 1: Pre-rubsign, "©TAKARA JAPAN” stamp, no indent on roof, 2-piece helmet
Type 2: Pre-rubsign, "©TAKARA CO. LTD. [BLOCK] JAPAN 1974, 1983” stamp, no indent on roof, 2-piece helmet
Type 3a: Pre-rubsign, "©TAKARA CO. LTD. [BLOCK] JAPAN 1974, 1983” stamp, no indent on roof, 1-piece helmet
Type 3b: Pre-rubsign, "©TAKARA CO. LTD. JAPAN 1974, 1983” stamp, no indent on roof, 1-piece helmet
Type 4: With rubsign (on left side), "©TAKARA CO. LTD. JAPAN 1974, 1983” stamp, indent on roof, 1-piece helmet
Type 5: With rubsign (on right side), "©HASBRO 1974, 1983 ©TAKARA CO. LTD. JAPAN 1974, 1983” stamp, indent on roof, 1-piece helmet
International variants also exist for Greece and Mexico.
Type 1GR: Pre-rubsign, no date stamp, no indent on roof, 2-piece helmet with no paint on face piece, no "M” in hood scoop, deep rough details. Unlike many international variants, this was not a mold used for production in any other market.
Type 3MX: Pre-rubsign, "1974 ©HASBRO 1983 ©TAKARA CO. LTF. JAPAN 1974-1983” stamp, no indent on roof, 1-piece helmet
Availability
Brawn was available in US and UK the first wave of 1984. Brawn was available again in 1985, sometimes packaged with a Mini-Spy. This version was also released in continental Europe, and in Japan’s G1 - Fight! Super Robot Lifeform Transformers as Gong. Brawn was produced and sold by licensee El Greco in Greece as Εγκέφαλος (Egkéfalos [Brain... obviously misinterpreting his English name]), listed as Type 1GR above. Brawn has not received a mainstream reissue release, outside of a 2003 keychain produced by licensee Fun 4 All. This newly-molded version eschews the rubsign, and has a molded loop on the front bumper that allows the included metal key chain to be clasped on. This is likely because the original tooling was permanently modified to create his successor, Outback.
Case Assortments (Item#/Asst#): 1984: Mini-Vehicles Asst. 1 (E5705/5700), 4 per 24; 1985: Mini-Vehicles with Mini-Spy (E5705/5709), 4 per 24; Mini-Vehicles Asst. 2 (E5705/5710), 1 per 24
MSRP: $2.99
Packaging: Blister card with instructions and Tech Spec on back, displayed in vehicle mode (1984), or robot mode (1985)
Robot Points: 1/2 Autobot
Paperwork included:none
Redecos & Retools
Brawn was recolored in Brazil by Estrela to produce the evil character Jipe, and retooled in 1986 to produce Outback.
Takara ID number: 15
The Transformers Brawn was part of the original assortment of Autobot Mini Vehicles released in 1984. The mold was first released in 1983 as part of Takara’s Micro Change line, but evidence exists to suggest it was originally designed by defunct American toy company Knickerbocker for the cancelled toyline, Mysterians. He transforms into a (somewhat inaccurate) Suzuki Jimny SJ20, with a non-removable spare tire on the roof.There are a couple different variations of the toy. The initial versions have the faceplate and upper corners of the helmet as a part of the back vehicle piece, poking through holes in the robot part, while later runs have the faceplate as part of the robot-part facade. Both versions can be found in the 1984 pre-rubsign releases of the toy, while only the ”full face front” version is available in the 1985 be-rubsigned release. There are also multiple copyright notice configurations on the back end of the vehicle mode if you care about that kind of thing.The Japanese release of ”Gong” was in a small box instead of on a card. Only the rubsign variant was available in this market (presumably the face tooling matches the Hasbro 1985 release, but that is not confirmed).There are a large number of redecoes of Brawn in various markets south of the border, which are covered in individual entries below (to reduce the clutter in this one). Mostly unchanged versions of Brawn were sold in Mexico by IGA and in Venezuela by Rubiplas: it’s very likely that there are small differences in plastic hues and copyright stampings, and, of course, quality control.The Brawn mold was also used to create the Malignus Jipe, and retooled to make Outback (except in Mexico, where Outback was a straight redeco of Brawn).
Brawn was an Autobot Mini Vehicle released in 1984, in the first wave of Generation 1. Brawn transforms into a generic off-road vehicle resembling a Land Rover Ninety (known later as the Land Rover Defender), with a Jeep-inspired chrome grill, and sporting a spare wheel on the roof.
Origins
His mold was originally THOUGHT to part of Takara’s 1983 Microman: Microchangeline as MC04 Mini CAR Robo 05: Jeep. However, recent discoveries published by YouTube’s Chris McFeely, indicate that Brawn was likely designed for Knickerbocker Toys’s Mysterians: Mobile Force as a toy called Jeepar, before Knickerbocker went out of business and presumably sold the designs to Hasbro or Takara, while selling some other non-vehicle Mysterians designs to Marchon. Brawn was eventually patented by Hideaki Yoke. The US Patent, titled Reconfigurable toy vehicle, was filed on October 4, 1985 (U.S. Patent No. USD297035 S).
Description
Brawn is molded primarily in two colors, (using black only for the wheels), and uses no die-cast metal. He shares his deeply treaded plastic wheels with wave-mates Huffer and Gears. Like all the former Microchange Mini CAR “big vehicles,” he also shares a similar, very simple, transformation scheme. His chrome arms pull out from the sides, where they are hidden behind rotating door panels, and his legs swing down from the rear of the vehicle. The black hood still bears a molded, stylized "M”, once thought a reference to the Microchange logo, but more likely the Mysterians logo, as it matches the M logo on Marchon’s eventual release of the geometrically-shaped Mysterians. Also like his brethren, his face is molded and painted flush with the bottom of the vehicle. Brawn’s low price point meant he included no accessories and only a sparse couple of stickers. Paint detail is limited to his face.
Date stamp location: back of vehicle
Rubsign location: None (1984), or left side door (1985)
Collector Notes
Brawn’s chrome arms are frequently broken and missing. they are a weak point in the design, and can be easily snapped off from the shoulder pins if they are pulled in the wrong direction. Furthermore, his arms may appear to be whole to the casual observer even when the chrome ares are missing due to the arm-like shape of his doors in robot mode.
Variants
There are two primary distinguishing factors among US-release Brawns. Initial releases are identified by two recessed corners on his helmet, which are part of a separate plate behind the main body plate that also includes the face, while this was later simplified to all be part of the main body piece. Later still, a square indent was added to the roof for a rubsign, which was never used for that purpose, probably because the spare tire and running lights would have made the sticker difficult to activate with a fingertip. At some point after the helmet simplification in mid 1984, a second mold was initiated, likely to replace the aging Microchange mold. With Type 3b, mushy details become sharp and the bottom half of the stamp no longer sits atop the block that erased the original “Takara Japan” stamp. Type 3b was modified into Types 4 and 5, and 3a was retired.
Type 1: Pre-rubsign, "©TAKARA JAPAN” stamp, no indent on roof, 2-piece helmet
Type 2: Pre-rubsign, "©TAKARA CO. LTD. [BLOCK] JAPAN 1974, 1983” stamp, no indent on roof, 2-piece helmet
Type 3a: Pre-rubsign, "©TAKARA CO. LTD. [BLOCK] JAPAN 1974, 1983” stamp, no indent on roof, 1-piece helmet
Type 3b: Pre-rubsign, "©TAKARA CO. LTD. JAPAN 1974, 1983” stamp, no indent on roof, 1-piece helmet
Type 4: With rubsign (on left side), "©TAKARA CO. LTD. JAPAN 1974, 1983” stamp, indent on roof, 1-piece helmet
Type 5: With rubsign (on right side), "©HASBRO 1974, 1983 ©TAKARA CO. LTD. JAPAN 1974, 1983” stamp, indent on roof, 1-piece helmet
International variants also exist for Greece and Mexico.
Type 1GR: Pre-rubsign, no date stamp, no indent on roof, 2-piece helmet with no paint on face piece, no "M” in hood scoop, deep rough details. Unlike many international variants, this was not a mold used for production in any other market.
Type 3MX: Pre-rubsign, "1974 ©HASBRO 1983 ©TAKARA CO. LTF. JAPAN 1974-1983” stamp, no indent on roof, 1-piece helmet
Availability
Brawn was available in US and UK the first wave of 1984. Brawn was available again in 1985, sometimes packaged with a Mini-Spy. This version was also released in continental Europe, and in Japan’s G1 - Fight! Super Robot Lifeform Transformers as Gong. Brawn was produced and sold by licensee El Greco in Greece as Εγκέφαλος (Egkéfalos [Brain... obviously misinterpreting his English name]), listed as Type 1GR above. Brawn has not received a mainstream reissue release, outside of a 2003 keychain produced by licensee Fun 4 All. This newly-molded version eschews the rubsign, and has a molded loop on the front bumper that allows the included metal key chain to be clasped on. This is likely because the original tooling was permanently modified to create his successor, Outback.
Case Assortments (Item#/Asst#): 1984: Mini-Vehicles Asst. 1 (E5705/5700), 4 per 24; 1985: Mini-Vehicles with Mini-Spy (E5705/5709), 4 per 24; Mini-Vehicles Asst. 2 (E5705/5710), 1 per 24
MSRP: $2.99
Packaging: Blister card with instructions and Tech Spec on back, displayed in vehicle mode (1984), or robot mode (1985)
Robot Points: 1/2 Autobot
Paperwork included:none
Redecos & Retools
Brawn was recolored in Brazil by Estrela to produce the evil character Jipe, and retooled in 1986 to produce Outback.
Theme:
1984
Manufacturer:
Hasbro
Year:
1984
Country:
United States
Series:
G1
Model Number:
Green Truck
Date Added:
2020-12-30 11:52:39
Automatic Estimated Value:
~$22.95
Automatic Estimated Date:
2026-02-08
Date Added:
2020-12-30 11:52:39
